S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Fold aside the cable harnesses (1) so that they do not end up between the control module and floor mat.
-
Route the control module's cable harness under the cable harnesses (2) and on toward the tunnel console.
-
Fold back the carpet.
-
Connect the connectors for the Bluetooth system as illustrated:
Applies to cars with internal amplifier
1. 1. Connect cable harness A to the cable from the control module.
Applies to cars with external amplifier
1. 1. Connect cable harness B to the cable from the control module.
Applies to all models
1. 2. Connect the microphone
2. 3. Connect the control panel
-
Take one of the cut pieces of foam tape and tape around the connectors.
-
Place the connectors and the excess wiring inside the center console.
-
Fold back the carpet.
