S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Hood Latch Release Cable: Service and Repair
Control Lock Engine Hood
Control lock engine hood
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the hood lock control
Fold back the insulation panel by the hood lock control.
Remove:
-
the 2 nuts
-
the mechanical cable from the control
-
control.
Installation
Note! For tightening torques, see Specifications. See: Specifications
Installing the hood lock control
Install:
-
the control
-
the cable
-
2 M6 nuts. Tighten.
Ensure that the insulation panel is in the correct position.
Check the function of the control.