S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Hood Latch Release Cable: Service and Repair
Wire Lock Engine Hood
Wire lock engine hood
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the mechanical cable
Remove:
-
the 2 screws for the cover above the hood latch
-
the cover.
Unhook the mechanical cable at the hood catch.
Remove the soundproofing panel on the driver's side in accordance with: Instrument panel lower See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Instrument Panel Lower.