S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Place the mountings from the kit over the holes in the backrest. Ensure the arrows point forward
-
Install the mountings. Use the screws from the kit. Tighten to 25 Nm (18 lbf. ft.).
-
Insert the safety net cassette (from the kit ) on the mountings in the left backrest, on the left hand side
-
Slide the cassette to the right until a click is heard, indicating that the spring (1) in the left-hand mounting of the cassette is in the corresponding
channel in the mounting in the backrest.
Illustration A
Using the safety net with the backrest folded up (illustration A and B)
-
Fold the rear backrests into position.
Illustration B
