S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Pull the net up. Insert the right mounting in the rear large hole in the rear mounting of the headlining. Then slide the mounting forwards to the front
hole
-
Repeat the operation on the other side. The safety net mounting springs into position. To position the net, pull towards the left mounting
-
Check that the safety net mountings are securely fixed to the mounting for the headlinings.
Illustration C
Using the net with the backrests folded down
-
The safety net can also be used with the backrest folded down. In this case, use the front mountings in the headlining.
Removing the safety net
-
Pull the single mounting for the safety net back to the larger hole. Pull out
-
Disconnect the other mounting in the same way.