S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Remove the upper floor supports on the left and right-hand sides if applicable.
Removing the sill trim panel from the tailgate:
-
Unscrew the two external clips at the front edge/bottom edge of the sill trim panel on the tailgate
-
Pry up one of the corners of the sill trim panel using a weatherstrip tool so that the two clips at that end release
-
Pull up the sill trim panel at the other end so that the remaining two clips release. Remove the sill trim panel
-
Detach the rubber strip where it covers the left-hand side panel in the boot opening.
Removing the left-hand side panel:
-
Remove the three clips (1) securing the left-hand side panel in the bodywork
-
Unhook the side panel from the mounting (2) on the underneath of the parcel shelf
-
Fold out the rear edge of the side panel from the bodywork. At the same time unhook the side panel from the rear load securing eyelet
-
Fold out the side panel so that the markings for making holes on the reverse of the panel are accessible.
Illustration A