S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Install:
-
the brake fluid reservoir -
-
the 1 screw on the side of the brake fluid reservoir. Tighten. See: Tightening torque See: Specifications/Tightening Torque.
Installing master cylinder
Install the master cylinder. See: Master cylinder, brake, R.H.D See: Brake Master Cylinder/Service and Repair/Master Cylinder, Replacing/Master
Cylinder, Brake, R.H.D
Finishing
Bleeding brake systems
Bleed the brake system. See: Brake system bleeding See: Brake Bleeding/Service and Repair/Brake System Bleeding.
Check that the brake pipe connections are sealed.
Check the brake fluid level.