S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Take the long hose and two hose clips from the kit. Connect the hose between the radiator pipe and upper heater socket.
-
Tighten the hose clips.
-
Take the remaining hose and two hose clamps from the kit. Connect the hose between the oil cooler and the lower outlet on the heater. The end
with the long straight section must be connected to the oil cooler.
-
Tighten the hose clips.
-
Take the radiation shield from the kit and thread on the joint cable of the heater.