S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Press the cable into the previously installed clips.
-
Reinstall the air baffle in the bumper shell and to its rear mounting in the bracket in the lower edge of the radiator.
-
Reconnect the connectors for the fog lamps if applicable.
-
Press the ends of the bumper shell into place on the body.
-
Position the cable as illustrated, and clamp it in at the top of the strut using a tie strap from the kit. Route it up to the top of the engine
compartment.
-
Install three clips from the kit on the front edge of the panel above the windscreen wiper motor.
-
Guide the cable up to the top of the engine compartment to the position illustrated.
Illustration A