S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Press the front intake cable into the clips. Guide down the cable at point (1) and route down through the engine compartment (behind the AC
pipes) down to the strut in the right link arm mounting.
Illustration B
-
Clamp in the cable, from the top of the engine compartment and down, using a tie strap.
Note! The cable must not be clamped directly to AC, fuel or brake pipes.
-
Clamp the cable from the front engine block heater socket in at the top of the strut using a tie strap from the kit.