S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Stabilizer Link: Service and Repair
Rear
Rear Stabilizer Bar Link
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Note! If the vehicle is equipped with anti-roll bars where the links have rubber bushings, see: Rear Stabilizer Bar Link.
Removal
Remove:
-
the 2 nuts. Counterhold the ball joint using a Torx wrench
-
the link.
Installing the anti-roll bar link
Note! For tightening torques, see Specifications. See: Specifications
Install:
-
the new link
-
the 2 M10 nuts.
Use a Torx wrench as a counterhold so that the boot is not damaged.