S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Turn the gear selector lever gaiter inside out.
-
Detach the clamp.
-
Pull the gear selector lever knob away from the gaiter.
-
Guide the gear selector lever knob inside the out-turned gear selector lever gaiter. The text on the gear selector lever knob must point from the
seam in the gaiter.
-
Thread the gaiter onto the lower section of the knob maintaining the position of the gaiter and knob.
-
The lower section of the knob must be edge to edge with the small opening of the gaiter (see inset illustration).