S60 L5-2.4L VIN 64 B5244S6 (2003)
-
over the left-hand air duct (2), along the lower edge of the centre console and on, in front of the air ducts (3) up to the dashboard environment
panel cut-out. Following which, continue on to the radio cut-out.
Illustration B applies to the S80
Route the cable harness:
-
under the cut-away tab (1) of the carpet at the left-hand front mounting for the right-hand seat.
-
over the left-hand air duct (2), along the lower edge of the centre console and on, between the air ducts (3) up to the dashboard environment panel
cut-out. Following which, continue on to the radio cut-out.
-
Secure at the points (4).
-
Route the ground lead (1) for the power supply (brown) under the carpet in the rear edge of the member for the front seat mounting, out to the
right-hand side of the door sill.
-
Route the cable under the existing cable harness on to the brown cable in the ground terminal at the front door pillar. Connect the cable to the
frame (2).
-
Clamp the cable together with the cable harness at the seat mounting member (3) and at the front door pillar (3).
-
Remove the panel (1) on the left-hand side of the centre console. Turn the clip at the rear edge of the panel through 90°, and pull the rear edge of
the panel outward and backward.