S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Spread the protective cover out over the reverse of the rear backrests
-
Insert the front rigid edge of the protective cover completely under the rear backrest panel. If necessary, use a small screwdriver or a weatherstrip
tool to pry the panel up
-
If necessary laterally adjust the protective cover.
-
Open the rear folding side panel in the cargo compartment
-
Install the rear corner of the protective cover on the upper section of the folding panel.
Ensure that the protective cover does not block the opening mechanism for the panel
-
Fold the panel back into position. Secure the panel
-
Repeat the operation on the other side.
-
Remove the backing from all the Velcro strips on the inside of the protective cover.