S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Align the upper edge of the protective cover so that it is directly under the lower edge of the side panel as illustrated
-
Press the upper edge of the protective cover onto the Velcro strips so that it attaches to the upholstery for the side panel
-
Repeat the operation on the other side of the cargo compartment.
Note! The Velcro strips consist of two sections. One section that should remain on the protective cover and one section that should be detached
and be positioned on the side panel for the cargo compartment.
-
Fold down the upper edge of the protective cover slightly where the Velcro strip is positioned. Press the Velcro strip positioned on the side panel
hard. At the same time carefully pull off both Velcro strips from each other
-
Repeat this operation with all the other Velcro strips on the protective cover.
-
Mark out holes for drilling for installing the Velcro strip for the side panel. First make a hole in the centre of the Velcro strip hole and through the
side panel. Use a pointed object.
Enlarge the holes slightly in order to find them when drilling
-
Carry out the operation on all Velcro strips.
