volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bag Holder|Page 17532 > < Bag Holder|Page 17530
Page 6
background image

-

Take the rail, the hooks and the end stop from the kit

-

Thread the hooks onto the rail. Insert the end stop

-

Take the two mounting plates and the screws from the kit

-

Mount the plates in the rail's inner holes. Use the screws. The long section of the mounting plate must point forwards in the car.

-

Lift up the rail and insert both mounting plates in the holes in the parcel shelf until the screws engage.

-

Now turn the plates so that they can be inserted into the holes.

-

Pull the rail backwards towards the rear edge of the holes, until the screws engage.

The rear section of the plates may require lifting to go over insulation on top of the parcel shelf.

-

Tighten using the two screws.

Removal

Carrier bags can be removed in two ways:

-

by carefully moving the hooks to one side

-

by lifting the handles for the carrier bags backwards, upwards and then forwards.

Cargo Compartment Sun Blind

Cargo compartment sun blind

Bag Holder|Page 17532 > < Bag Holder|Page 17530