S60 L5-2.4L VIN 64 B5244S6 (2003)
Seat Latch: Service and Repair
Replacing WHIPS
Replacing WHIPS
NOTE: This inspection must be carried out after all types of collision. If the deformation element is deformed or the indicator has been triggered, the
deformation element must be replaced.
Removing the WHIPS system
Remove:
-
the seat from the car.
-
the lumbar support knob.
Turn the adjuster or run the backrest adjustment to the maximum reclining position.
Release the adjustment mechanism (C). Fold the backrest forwards.
NOTE: Be careful when the spring releases. There is considerable force in the spring.
Remove the spring (D).
Remove:
-
the indicator pin or its remains.
-
This applies only to cars up to the following chassis number, S60: -1499
-
one nut (B) on each side
-
one spindle (E) from each side.