S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Remove the protective film from the tape.
Illustration B
-
Insert and pull the brake lamp cable through the hole in the tailgate
-
Press the spoiler into place on the tailgate.
Illustration C
-
Install the four screws (from the kit). Tighten the spoiler. Use an M6x10 screw in hole (1). Use an M6x14 screw in hole (2)
-
Tighten the screws. Tighten to a maximum of 4 Nm (2.9 lbf.ft). A greater torque may damage the threaded joint.