S60 L5-2.4L VIN 64 B5244S6 (2003)
Angle the screw upwards as much as possible.
Install the brake pedal on the screw. Turn so that the pedal and screw are between the brackets. The pedal should be positioned over stop lamp switch
mounting and towards the dashboard lower edge.
Turn the pedal downwards past the stop lamp switch mounting. Do this before the screw is secured in the second bracket.
Install the nut on the screw. Apply a little locking fluid to the screw.
Tighten the nut. Tighten to 25 Nm.
Install upper steering shaft
