volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Water Pump|Specifications|Page 4075 > < Water Pump|Specifications|Page 4073
Page 2
background image

Warning! Ensure that no power steering fluid is spilled. It is extremely flammable.

-

the auxiliaries belt

-

the front camshaft belt cover

Raise the car.

-

the right front wheel

-

the nuts for the cover in the right fender liner.

Turn the crankshaft clockwise until the markings on the crankshaft and camshaft pulley correspond.
Turn the crankshaft a further 1/4 of a turn clockwise, then back counter-clockwise until the markings correspond.
Remove the upper camshaft belt cover.

Removing the timing belt

Slacken off the belt tensioner.

Slacken off the belt tensioner center screw slightly.
Hold the center screw secure and turn the eccentric on the tensioner with a 6 mm (0.24") allen key clockwise to the 10 o'clock position.
Remove the camshaft belt.

Remove the coolant pump

Remove the screws

-

Tap the pump wheel with the shaft of a hammer and remove the pump.

-

Clean the gasket faces thoroughly.

Replace the coolant pump

Water Pump|Specifications|Page 4075 > < Water Pump|Specifications|Page 4073