S60 L5-2.4L VIN 64 B5244S6 (2003)
Install the cap. Check that the marking, if any, matches.
Lubricate and install new screws. Tighten in two stages:
1. 20 Nm.
2. Angle-tighten 90°.
Check that the connecting rod can be moved sideways.
Note! The crankshaft must not be rotated before the connecting rod cover has been tightened.
Installing the oil pump suction pipe
Install a new sealing ring on the suction pipe.
Carefully press the suction pipe down into the intermediate section.
Check that the sealing ring is correctly positioned.
Tighten.
Install new sealing rings for the oil pan oil ducts.
Installing the oil pan
Wipe the surfaces dry.