S60 L5-2.4L VIN 64 B5244S6 (2003)
Cylinder Head Gasket: Specifications
Tightening Specifications
Cylinder Head
Use new screws.
Lubricate all the screws.
Tighten the screws in the order shown.
Tighten the screws alternately from the center and outwards.
1st Step .............................................................................................................................................................................................................. 20 Nm
2nd Step ............................................................................................................................................................................................................. 60 Nm
3rd Step .......................................................................................................................................................................................... Angle-tighten 130°
Intake Manifold
Torque ............................................................................................................................................................................................................... 25 Nm
Exhaust Manifold
Torque ............................................................................................................................................................................................................... 25 Nm
Camshaft Bearing Caps/Camshaft Cover
Refer to General Tightening Torque, see Engine, Specifications.
Refer to procedure for sequence. See: Cylinder Head Assembly/Service and Repair
Camshaft Timing Gear Pulley
Camshafts Without Variable Valve Timing ...................................................................................................................................................... 20 Nm
Camshafts With Variable Valve Timing ........................................................................................................................................................... 10 Nm