S60 L5-2.4L VIN 64 B5244S6 (2003)
-
the front SIPS member
-
unhook the exhaust system from the rubber mounting
-
the screw in the support bracket for the exhaust manifold. Unhook the exhaust manifold from the cylinder head.
Draining the coolant
Raise the car. Remove the splash guard from under the engine.
Open the engine nipple.
Drain the coolant into a clean container.
Close the nipple.
Removing components
Remove:
-
the intake hose between the mass air flow (MAF) sensor and the electronic throttle module (ETM)
-
the cover over the ignition coils
-
the upper timing cover.
