S60 L5-2.4L VIN 64 B5244S6 (2003)
Remove:
-
Variable valve timing solenoid
-
spark plugs for cylinders 1 and 5.
Install 2 tools 999 5454 PRESS TOOL See: Tools and Equipment/999 5454 Press Tool. Leave a 2-3 mm gap to the camshaft cover.
Ensure that the screw in the spark plug well is fully tightened.
Remove all the screws securing the camshaft cover to the cylinder head.
Use pliers 999 5670 Pliers See: Tools and Equipment/999 5670 Pliers to lift the cover from the cylinder head.
Install the pliers at the stop lugs.
Start with cylinder 1 and work alternately backward.
Slacken off the wing nuts approximately 2 turns. Repeat the procedure.
Carefully press out the front and rear camshaft seals.
Note! Be very careful so that the sealing faces on the camshafts are not damaged.