S60 L5-2.4L VIN 64 B5244S6 (2003)
If necessary, fill oil in the AC compressor according to applicable specifications.
Hold the cable channel to the side and install the AC compressor by inserting it between the sub-frame and the car body.
Install the screws, 4 pcs. M8, for the AC compressor and tighten.
Note! Always use new O-rings lubricated with compressor oil.
Install:
-
AC compressor's low and high pressure hoses. On certain vehicle models, it may be easier to install and tighten the screws from above
-
the magnetic clutch connector.
Install the cable channel on the sub-frame and bolt it down.
On certain variants, the cable channel is mounted on the control module box and then on the sub-frame.
Installing the auxiliaries belt
MY 1999-2000:
Install the auxiliaries belt on the AC compressor according to: Auxiliaries belt / belt tensioner, replacing See: Engine, Cooling and Exhaust/Engine/Drive
Belts, Mounts, Brackets and Accessories/Drive Belt Tensioner/Service and Repair.
MY 2001-2004