S60 L5-2.4L VIN 64 B5244S6 (2003)
Install the auxiliaries belt on the AC compressor according to: Auxiliaries belt / belt tensioner, replacing See: Engine, Cooling and Exhaust/Engine/Drive
Belts, Mounts, Brackets and Accessories/Drive Belt Tensioner/Service and Repair.
MY 2005
Install the auxiliaries belt on the AC compressor according to: Auxiliaries belt / belt tensioner, replacing, B5244T5, B5254T2 See: Engine, Cooling and
Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt Tensioner/Service and Repair Auxiliaries belt / belt tensioner, replacing See:
Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt Tensioner/Service and Repair.
Installing the battery negative cable
Fit the battery's negative cable in accordance with: Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery,
Disconnecting.
Refrigerant and leak detection
Vacuum pump side. See: Vacuum pumping See: Service and Repair/Vacuum Pumping.
Fill the system with refrigerant. See: Refrigerant, filling See: Service and Repair/Refrigerant, Filling.
Check for system leaks according to: Leak tracing, fluorescent tracing agent / UV lamp See: Testing and Inspection/Component Tests and General
Diagnostics/Leak Tracing, Fluorescent Tracing Agent / UV Lamp or according to: Leak tracing, electronic leak tracer See: Testing and
Inspection/Component Tests and General Diagnostics/Leak Tracing, Electronic Leak Tracer.
Installing the splash guard
Install:
-
the catches in the protective casing's front edge and press forward
-
the screws, 2 pcs., for the front protective cover.
Finishing
Installing the splash guard
Install:
-
the protective cover under the engine
-
the screws, 7 pcs., and tighten.
Lower the vehicle.
