S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Grasp the free end of the mounting strip. Pull the mounting strip backwards. Hook the mounting strip around the edge in the headlamp. At the
same time, press the headlamp guard towards the headlamp
-
Check that the guard is properly secured.
Removing when cleaning and replacing
The headlamp guards must be removed when using a car wash. Carry out the procedure in points 1, 5, 6, 7 reverse order.
The headlamp guards must also be removed when cleaning the headlamps and the inside of the headlamp guards. This must be carried out regularly to
prevent deterioration in the function of the headlamps.
Note! Do not use strong washing agents which can affect the transparency of the headlamps and therefore the function.
Note! The headlamp guard is a perishable component which must be replaced when necessary. When replacing the headlamp guards, all the
components in the kit must be used. Do not reuse the old components.
-
Remove the headlamp guard. See Headlamp guard See:
-
Remove the clips by pressing up the tab on the clip using a plastic weatherstrip tool as illustrated.
Applies to cars with headlamp washers
