S60 L5-2.4L VIN 64 B5244S6 (2003)
Using masking tape
This protects the housing from adhesive residue when removing the lens (adhesive residue is difficult to remove).
Tape around the housing, the black area in the illustration (1) towards the edges of the lens. Also tape the mounting points for the trim strip.
Preparation
Tool 999 7067 for removing adhesive residue.
Tool 999 7066 for spreading out the adhesive.
Hot-air gun, knife, masking tape/paper as protection (the reflector).
Protective goggles, leather gloves.
Isopropanol cleaning agent (P/N 1161 721).
Removing the headlamp lens
