volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 5
background image

-

Position the pipe / hose in the mounting on the condenser. Position the pipe coupling

-

Thread and tighten the screw by hand as much as possible

-

Tighten the screw for the pipe coupling from the compressor. Tighten to 25 Nm ±6 Nm.

-

Locate the air conditioning aggregate against the rubber seals. Tighten the lower screws for the air conditioning aggregate. Tighten to 25 Nm

Maintenance > Hoses > Hose/Line HVAC > Component Information > Service and Repair > Drain Hose, Engine/Filter Housing, Replacing > Page 2619

< PREV PAGE NEXT PAGE >