S60 L5-2.4L VIN 64 B5244S6 (2003)
passenger compartment connector socket as possible.
-
Take a carpet knife and cut a slit in the carpet just in front of the locking sleeve. Make the cut as long as the diameter of the locking sleeve.
NOTE: Do not damage any wiring and hoses under the carpet.
-
Remove the passenger compartment connector socket from the bracket and fold the carpet to one side.
-
Thread the cable through the hole in the carpet.
-
Grease in the O-ring with low temperature grease (part no. 1161417-9).
NOTE: Ensure that no grease gets onto the connector surfaces.
-
Connect the cable to the passenger compartment connector socket. Press a locking sleeve (from the kit) over the joint.
-
Fold the carpet back into position and install the passenger compartment connector socket using both the screws.
-
Reinstall the sound barrier, the centre console's side panel and sill moulding.