S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Press the locking sleeves (from the kit) over the cable splices. The larger locking sleeve must be on the socket (3).
-
NOTE: Check that the cables do not chafe against sharp edges or moving parts in the engine compartment.
Tighten the branch connector to the bracket.
-
Reinstall the engine splash guard and torque tighten the screws to 24 Nm (18 lbf.ft.).
Installing the passenger compartment connector socket
-
Partially fold the carpet back over the bracket.
-
Make a hole in the carpet opposite the upper mounting hole in the bracket using a double ended scriber.
-
Take a screw and the passenger compartment connector socket from the kit. Tighten the passenger compartment connector socket to the bracket in
the upper mounting.
-
Insert the double ended scriber into the lower mounting for the passenger compartment connector socket. Make a hole in the carpet opposite the
lower hole on the bracket.
-
Tighten the lower mounting for the passenger compartment connector socket using a screw from the kit.
-
Press a locking sleeve (from the kit) onto the passenger compartment connector socket. Slide the locking sleeve as far along the terminal for the