S60 L5-2.4L VIN 64 B5244S6 (2003)
Applies only to 6 cylinder engines:
Install the bracket for the heated oxygen sensor (H02S) in its mounting. Connect the connectors.
Install the wiring on the sub-frame. Connect the connectors.
Installing the bracket for the exhaust pipe
Install:
-
the mounting for the exhaust pipe on the bracket. Tighten to 10 Nm
-
the brake pipe on the exhaust pipe bracket
-
the exhaust pipe bracket. Tighten the bracket screws to 25 Nm.
Installing the track rod ends on the steering arms
