S60 L5-2.4L VIN 64 B5244S6 (2003)
Install:
-
the two screws for the spring seat mounting. Tighten to 24 Nm
-
the cargo compartment carpet.
All cars:
Carry out wheel alignment.
Check/adjust the wheel alignment. See: Wheel alignment, checking / adjusting See: Alignment/Service and Repair.
Bushing Inner Control Arm Lower, Replace
Bushing inner control arm lower, replace
Special tools:
951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder
999 7034 Connecting rod M12X400 See: Tools and Equipment/999 7034 Connecting Rod M12X400
999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve
999 7047 Drift See: Tools and Equipment/999 7047 Drift
999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter Incl. 2X MC6C M6X12
Removal
Preparations
Remove the wheels on both sides.
Disconnecting the lateral link
-
Install the retaining strap and secure the lower control arm slightly against the jacking point
-
Remove the lateral link screw at the spindle
-
Slacken off the screw at the front mounting slightly. Turn the lateral link downwards.
Disconnecting the tie rod