S60 L5-2.4L VIN 64 B5244S6 (2003)
Tighten the sensor screws lightly.
Install the rubber washer, lock washer and the nut on the gear shift linkage rod connection.
Tighten the nut.
Lock the nut with the lock washer.
Adjusting the gear-shift position sensor
Adjust the gear-shift position sensor. See Gear-shift position sensor, checking/adjusting, B5254T2, AW55-50/51SN, B5254T2, AW50/51 AWD See:
Sensors and Switches - A/T/Transmission Position Switch/Sensor/Adjustments.
Installing the gear-shift position sensor, continued
Install:
-
the cable duct on the stud on the gear-shift position sensor. Tighten the nut. Tighten to 25 Nm
-
the lever on the gear shift linkage rod. Tighten to 16 Nm
-
the transmission cable on the lever on the bracket for the cable on the transmission. Tighten to 25 Nm.
Installing engine compartment components
