S60 L5-2.4L VIN 64 B5244S6 (2003)
Install:
-
the front splash guard
-
the outer front splash guards
-
the front wheels. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair
Removing lifting beams and the lifting hook
Twist in the tab on the cable harness holder.
Install the screw for the gear-shift position sensor and holder. Tighten to 25 Nm
Install the lever on the gear shift linkage rod. Tighten the nut. Tighten to 16 Nm
Installing the connectors and the cable harness
Hook the connectors into place on the mounting. Connect the connectors
Install:
-
the tie straps around the cable harness. Secure the cable harness in the cover for the control system
-
the mounting for the cable harness on the bracket for the air cleaner (ACL)
-
the gear selector cable and bracket. Tighten to 25 Nm. Connect the cable to the lever
Installing the air cleaner (ACL) housing
