S60 L5-2.4L VIN 64 B5244S6 (2003)
Remove the driver's side soundproofing panel.
Disconnect the connector from the pedal position sensor.
Unhook the sensor from the pedal and cylinder.
Removing the push rod from the master cylinder
Remove
-
the retaining clip for the master cylinder push rod. Unhook the push rod from the pedal
-
the Torx screw (TX 40) and the lock nuts holding the cylinder in the body.
Removing the master cylinder from the firewall
Lift up the cylinder. Remove the hose from the cylinder.
Installation
Installing the master cylinder