S60 L5-2.4L VIN 64 B5244S6 (2003)
Clutch Pedal Assembly: Service and Repair
Bushing, clutch pedal, replacing
Removal
Remove the soundproofing panel and the pedal position sensor
Remove
-
the driver's side soundproofing panel. Bushing, brake pedal, replacing
-
the pedal position sensor from the clutch pedal
-
clip that locks clutch cylinder push rod. Unhook the push rod from the pedal.
Unhook auxiliary spring
Press down the pedal. Unhook the auxiliary spring.
Remove torx screw (upper arrow).
Unscrew pedal bearing screw
Unscrew the screw approximately 30 mm.
Remove bracket and pedal.
Replacing bushings or pedal assembly