S60 L5-2.4L VIN 64 B5244S6 (2003)
Constant Velocity Joint Boot: Service and Repair
Automatic Transmission
Boot, half shaft, replacing
Special tools:
951 2619 Pliers See: Tools and Equipment/951 2619 Pliers
999 2412 PUNCH See: Tools and Equipment/999 2412 Punch
Disassembly
Note! Preparatory work, left-hand side: See and Half shaft, left, replacing See: Service and Repair/Half Shaft, Left, Replacing. Preparatory
work, right-hand side: See Se and Drive shaft right, replacing See: Service and Repair/Drive Shaft Right, Replacing.
Remove the boot
Secure the drive shaft in a vice with soft jaws.
Remove the clamps from the boots.
Cut the boot and remove it from the shaft.
Check the measurement
Wipe off the grease from the constant velocity joint housing.
Measure the distance from the inner ring to the inner groove on the shaft. Note the measurement.
Tap off the constant velocity joint housing