volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

M/T - 1st/Reverse Gear Difficult to Engage|Page 8160 > < M/T - 1st/Reverse Gear Difficult to Engage|Page 8158
Page 1
background image

Shift Cable: Service and Repair

Transmission cable, replacing

Special tools:

999 7071 Puller See: Tools and Equipment/999 7071 Puller 
999 7077 Jimmy bar See: Tools and Equipment/999 7077 Jimmy Bar 

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.

Removal

Removing the air cleaner (ACL) housing

The air cleaner housing (ACL) assembly with the intake pipe. Pull the air cleaner (ACL) housing out of its mountings.

Remove:

-

the left front wheel

-

the 2 plastic nuts for the fender liner. Remove the splash guard over the drive shaft.

Removing the gear selector cables from bracket and the lever at the transmission

M/T - 1st/Reverse Gear Difficult to Engage|Page 8160 > < M/T - 1st/Reverse Gear Difficult to Engage|Page 8158