volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

M/T - 1st/Reverse Gear Difficult to Engage|Page 8161 > < M/T - 1st/Reverse Gear Difficult to Engage|Page 8159
Page 2
background image

Remove:

-

the gear selector cables at the levers. Use tool 999 7077 Jimmy bar See: Tools and Equipment/999 7077 Jimmy Bar 

-

the cable sleeves from the brackets by moving the sleeves back on the cables.

Removing the center console

S60R (B5254T4 engine)

Remove the center console. See Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console,
Replacing.

S60 (other engines)

Remove the center console. See Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console,
Replacing  (-2004) or  Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console, Replacing 
(2005-).

Removing the rubber lead-in

Fold and roll the carpet under the accelerator pedal (AP). Fold and roll the carpet under the accelerator pedal (AP).

M/T - 1st/Reverse Gear Difficult to Engage|Page 8161 > < M/T - 1st/Reverse Gear Difficult to Engage|Page 8159