S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Pull the sun blind up. Secure the hooks in the mountings above the rear windshield.
Adjust the position of the sun blind. Then tighten the nut underneath.
-
Press the ends of the sun blind down so that it is against the underlay. At the same time press an awl through the screw holes in the ends of the sun
blind, to make holes in the parcel shelf
-
Screw the sun blind into place using a screw (1) at each end.
Hint: Use a magnetic screwdriver or butyl tape to facilitate installing the screw in the narrow gap by the window.
-
Install the covers (2) over the ends.
