S60 2.5T L5-2.5L Turbo VIN 59 B5254T2 (2006)
-
Pull the bumper backwards slightly. Bend out the sides (1) so that they detach from the mountings (2). Then pull the bumper backwards until it
detaches completely.
-
Place the bumper on a clean underlying surface that will not damage the paint.
Illustration B
Applies to cars with parking assistance
-
Detach the bumper in accordance with the above. Carefully pull the cable (3) out through the hole in the car.
-
Place the bumper on a clean underlying surface that will not damage the paint.
Remove:
-
the rivet (1) on the bracket (2) for the silencer. Use cutting nippers
-
the screws (3) on the bracket
-
the bracket by detaching the rubber mountings (4). The bracket will not be used again.