S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Remove the tow hitch from the cross member. First turn the handle (1) clockwise until a click is heard and the pin (2) is in the outer position. Pull
the tow hitch straight back. Ensure that the shaft is greased.
-
Clean any underseal and dirt from the mating surfaces between the tow hitch cross member (1) and the car body
-
Install the screws (2, 3, 4) from the underneath with the washers (5) between. Finger tighten. Install a washer (6) on the left-hand side on the front
screw (4). This is to secure the rear mounting for the heat deflector plate using the screw (7). (See illustration 13B).
-
Install the heat deflector plate (1). Secure the heat deflector plate using the screw (7) and the washer (6)
-
Reinstall the rubber mounting (8) for the silencer.
Hint: Use soap to facilitate installation of the rubber mounting.