S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Remove the two connected connectors on the inside of the rear end piece. First press the connectors down at the lower edge until the catches (1)
release. Then slide the catches upwards out from the groove
-
Disconnect the connectors. If there is a cable in the holder at the side, disconnect it.
-
Remove the cover or ashtray for the rear end (if applicable). First pry out the rear end slightly until the catches (1) release. Then press out the
cover or ashtray.
-
Install the cover or the ashtray on the new rear end. Press so that both catches engage.
Installation