S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
![background image](/volvo/s60_awd/l5-2.5l_turbo_vin_59_b5254t2/Page-649004.png)
Assemble the connecting rod. Check that the cover is facing the correct direction. Tighten to 20 Nm.
Secure the large end of the connecting rod in a vice with soft jaws (copper or aluminium). Mark both halves with the cylinder number. Use a centre
punch or number punch.
Selecting piston
For every cylinder there is a classification letter stamped (C, D, E) on the top of the engine block.
First letter after the digit 1 corresponds to the classification of the cylinder bore in cylinder 1 and is then followed by cyl. 2, 3, 4, 5.
Cylinder selection is determined by the classification of the cylinder bore. For example: Cylinder class D must have pistons marked D etc.
Installing piston rings