S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Remove screw and split pin.
Removing the adjustment nut
Remove the adjustment nut.
Use wrench 999 5371 NUTS-DIFF.BEARING) 1035 See: Tools and Equipment/999 5371 Nuts-Diff.Bearing) 1035.
Removing the sealing ring
Tap out the sealing ring.
Use a screwdriver.
Installing the sealing ring
Install the sealing ring for the adjustment nut.
Lubricate the sealing ring lip with wheel bearing grease, P/N 1161241-3.
Use drift 999 5655 Punch See: Tools and Equipment/999 5655 Punch. Tap in the seal until the drift reaches the nut.
Install a new O-ring on the nut. Lubricate the O-ring and threads with wheel bearing grease as above.
Installing the adjustment nut