S60 T5 L5-2.4L Turbo VIN 54 B5244T5 (2006)
Crankshaft Position Sensor: Service and Repair
Engine speed (RPM) sensor, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the air cleaner (ACL)
Remove the hose clamp from the mass air flow (MAF) sensor. Disconnect the connector from the mass air flow (MAF) sensor.
Remove:
-
the 3 x screws for the fresh air intake (1) in the front cover plate
-
the 3 x screws for the air cleaner (ACL)
-
the air cleaner (ACL) (2) assembly.
Unhook the control valve from the air cleaner (ACL) housing.
Removing the engine speed (RPM) sensor
