S60 T5 L5-2.4L Turbo VIN 54 B5244T5 (2006)
Shifter M/T: Removal and Replacement
Gear Selector Lever Boot
Gear selector lever boot
Gear selector lever boot
-
Pry off the rear edge of the gear selector lever cover together with the boot until the two clips release. Use a plastic weatherstrip tool. Remove the
gear selector lever cover and the boot
-
Then pull the panel up until the four clips at the sides release.
-
Lift the boot up over the gear selector lever to access the locking sleeve
-
Press in the two catches on the locking sleeve. Pull the locking sleeve downwards.