S70 L5-2.4L VIN 61 B5244S (2000)
Mark up and remove the vacuum hoses from the intake manifold.
-
the cover over the ignition coils.
Remove the hose from the flame trap to the cam cover at the terminal in the cam cover.
Remove the fuel rail mounting screws.
Separate the fuel line quick-release connector.
Use tool 9512666.
Spray universal oil or similar around the injector nozzle at the terminal on the intake manifold.
Gently work the fuel rail and injector nozzles loose.
Removing the intake manifold/gasket
Slacken off
-
the dipstick bracket.
-
the lower screws for the intake manifold a few turns.
Remove
-
the mounting screws in the upper row and the outer screws in the lower row.
-
the intake manifold by lifting it approximately 20 mm. Allow the crankcase ventilation hose to run through the intake manifold without
disconnecting it from the flame trap.
Transferring components when replacing the intake manifold
Transfer