S70 L5-2.4L VIN 61 B5244S (2000)
-
Remove:
-
The screw ( 1 ) for the rear engine pad.
-
The screw ( 3 ) for the front engine pad.
-
The screw and nut ( 2 ) for the torque rod.
Removing the control arm on the left-hand side.
-
Position mobile jack 998 5972 on the torque rod mounting in the transmission.
NOTE: Use a wooden block as a shim.
-
Remove:
-
The four screws for the control arm.
-
The control arm.
Removing the control arm on the right-hand side
-
Position mobile jack 998 5972 against the oil trough.